Epson 10020 User Manual page 40

8. Repeat the procedure for the Startup diskette and the
Reference diskette.
9. When you finish copying the last system diskette and the
Copy another diskette (Y/N)? prompt
appears, press N to return to the MS-DOS command
prompt.
Copying Diskettes on the Apex l00\20
1. The C>
: and press Enter.
C
2. Type the following and press Enter:
DISKCOPY A: A:
The screen displays these messages:
Insert SOURCE diskette in drive A:
Press any key when ready . . .
3. insert the Startup diskette in drive A (the diskette drive),
as shown below, with the label facing up and the read/write
slot leading into the drive.
prompt should be on the screen; if it is not, type
Setting Up Your System 1-23