Epson 10020 User Manual page 141

To verify or change the primary serial port parameters,
highlight
change the secondary serial port parameters, highlight
Secondary serial port
option, you see a menu similar to this:
The procedure for changing the default settings is identical
for the primary and secondary serial ports. Just follow the
instructions below to set the parameters as needed. (See the
manual for your serial device to determine which parameter
settings it requires.)
When you finish changing the settings, highlight
*** SAVE SETTINGS
the Setup menu.
Baud rate
To set the speed of communication, highlight
and press Enter. The screen displays the following options:
Primary serial port
Baud rate
Parity
Data length
Stop bits
*** SAVE SETTINGS ***
110 bps
150 bps
300 bps
600 bps
1200 bps
2400 bps
4800 bps
9600 bps
19200 bps
38400 bps
Changing DIP
and press Enter. To
and press Enter.
1200 bps
None
7 bits
1 bit(s)
*** and press Enter to return to
Switches ad Using Setup
Foreither
Baud rate
A-11