Peripherals Connection; Wifi(802.11B/G) Connection - Source Technologies STm.57w User Manual

When the printer is installed initially or when you face a problem, you can run the
self test and check the information about
-Control Circuit, Mechanism, Print Quality, ROM Version
After checking with self-test and no issues are found, you can examine other
devices and software. This function is working independent of devices and software.
Motor protection from being overheated
●
The motor should be stopped and cooled about more than 30 seconds after
continuous printing 1.5 meter
16

4. Peripherals Connection

This product can communicate with other devices via Wifi(802.11b/g)
communication and cable.

4-1 Wifi(802.11b/g) Connection

1. The Printer can be connected to devices equipped with wifi(802.11b/g)
communication capacity (PDAs, PCs, etc.)
2. Use the wifi(802.11b/g) connection function supported by the device to
connect to the printer.
NOTE
Refer to the wifi(802.11b/g) Manual for more details on connection.
17