Oki C5300n User Manual page 116

Note: Factory default settings are shown in bold.
Item
ZERO
CHARACTER
LINE PITCH
WHITE PAGE
SKIP
CR FUNCTION
LINE LENGTH
FORM LENGTH 11 inch;
TOF POSITION 0.0
LEFT MARGIN
FIT TO LETTER DISABLE
TEXT HEIGHT
FX Emulation Menu (cont.)
Settings
NORMAL
SLASHED
6 LPI
8 LPI
OFF
ON
CR
CR+LF
80 COLUMN
136 COLUMN
11.7 inch
12 inch
1.0 inch in 0.01-inch
to
increments
0.0 1.0 inch in 0.01-inch
to
increments
ENABLE
SAME
DIFF
C5300 Menu Functions • 116
Explanation
Sets the zero to be slashed
or unslashed.
Specifies the line spacing
(lines per inch).
Change this setting to ON if
you do not wish to print blank
pages
Not available for duplex
printing.
Sets functionality on receipt
of CR code.
Specifies the number of
columns that will print on a
page (characters per line).
Specifies the length of print
media.
Specifies the distance of
print from the top edge of the
paper.
Specifies the distance of
print from the left hand edge
of the paper.
Sets the printing mode that
can fit print data, equivalent
to 11 inches (66 lines), in the
LETTER-size printable area.
Sets the height of a
character. Change to DIFF if
you wish the character
height to vary with the
Character Pitch setting.