Note:
Factory default settings are shown in bold.
Item
X ADJUST
Y ADJUST
DUPLEX X ADJUST -2.00MILLIMETER TO
DUPLEX Y ADJUST -2.00MILLIMETER TO
PCL TRAY2 ID#
PCL MP TRAY ID#
DRUM CLEANING
System Adjust Menu
Settings
-2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
-2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
+2.00MILLIMETER
Default = 0.00
+2.00MILLIMETER
Default = 0.00
1 to 59
Default = 20
1 to59;
Default = 4
OFF
ON
C5300 Menu Functions • 122
Explanation
Adjusts overall print position
horizontally in 0.25
increments.
Adjusts overall print position
vertically in 0.25 increments.
Adjusts overall print position
of print face horizontally in
0.25 increments.
Adjusts overall print position
of print face vertically in 0.25
increments.
Appears only if the optional
Second Paper Tray (see
"Second Paper Tray" on
page 158) is installed.
Sets Tray 2 number for the
PCL emulation.
Sets MP tray number for PCL
emulation.
If you are experiencing
horizontal white lines on your
printed pages, enter the menu
and temporarily change this
setting to ON, then send a
one page print job. This will
cause an extra blank sheet to
print, cleaning the drum prior
to printing.
Careful! Leaving this set to
ON will reduce the image
drum life.