Auto Switching; Media: Multi-Purpose Tray - Oki C5300n User Manual

Auto Switching

If you have identical paper stock loaded in the Multi-Purpose Tray or
the optional Second Paper Tray, you can have the printer
automatically switch to the other tray when the current tray runs out of
paper. This function is enabled in the Print Menu. (See page 187.)
M : M
EDIA
Use the Multi-Purpose (MP) Tray for printing card stock, labels,
envelopes and transparencies. Or load a stack of letterhead
stationery to switch to as needed.
• A stack of media about 3/8'' (10 mm) high can be loaded into the
MP Tray, equivalent to about 10 envelopes or 50 transparencies.
• Media should be loaded print side up, top edge facing into the
printer.
• Generally, the rear exit (Face Up Stacker) is used with the MP
Tray.
The duplex unit can be used for paper only, at weights up to 28
lb. US Bond (105 g/m
duplex (two-sided printing) function for labels, envelopes,
transparencies, or paper heavier than 28 lb. US Bond.
-P
ULTI URPOSE
Important!
2
metric, 58 lb. Index). Do not use the
C5300 Media Recommendations • 16
T
RAY