General Maintenance; Batteries; Battery Pack Removal And Preparation For Recycling - Craftsman 320.28102 Operator's Manual

I_ Put a drop of good-quality machine oil onto the inner bushing washer and outer blade washer
where they will contact the blade (see Fig, 27),.
[] Place a new saw blade inside the lower blade guard, onto the spindle shaft and against the
inner bushing washer.,
NOTE: The teeth of the blade should point upward at the front of the saw
[] Replace outer blade washer,
[] Depress and hold spindle lock button as you replace the blade screw and hand tighten the
screw in a counterclockwise direction_ Use the hex key to tighten the blade screw securely.
[] Return hex key into the storage area.
1
i
i OTE: Never use a blade that is too thick to allow the outer blade washer to engage with the flat side of the spindle.
]
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic part&. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use. Use clean cloths to
remove dirt, dust, oil, grease, etc,
BATTERIES
The battery pack is equipped with Lithium-Ion rechargeable batteries. The duration of use from
each charge will depend on the type of work performed_
The batteries in this tool have been designed to provide maximum trouble-free life. Like all
batteries, they will eventually wear out,. Do not disassemble the battery pack or attempt to replace
the batteries. Handling of the batteries, especially when wearing rings and jewelry, could result in
a serious burn°
To obtain the longest possible battery life, read and understand the operators manual
[] It is good practice to unplug the charger and remove the Lithium-ton battery pack when not in use,
For Lithium-Ion battery pack storage longer than 30 days:
[] Store the Lithiumqon battery pack where the temperature is below 80°F (26°C) and free of
moisture.
[] Store Lithium-Ion battery packs in a 30%-50% charged condition.
Every six months of storage, fully charge the Lithium-Ion battery pack_
[] Exterior may be cleaned with a cloth or soft non-metallic brush,
BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING
To preserve natural resources, please recycle or dispose of batteries properly°
This product contains lithium-ion batteries,. Local, state or federal laws may
prohibit disposal of lithium-ion batteries in ordinary trash° Consult your local
waste authority for information regarding available recycling and/or disposal
options.
A_ARNnlRG= Upon removal, cover the battery pack's terminals with heavy-duty
adhesive tape. Do not attempt to destroy or disassemble the battery pack or remove
any of its components. Lithium-ion batteries must be recycled or disposed of properly.
Also, never touch the terminals with metal objects and/or body parts as a short circuit
may result. Keep away from children. Failure to comply with these warnings could
result in fire and/or serious injury.
3I