Safety Symbols - Craftsman 320.28102 Operator's Manual

20.0-volt lithium-ion cordless 7 1/4-in circular saw with laser trac
Table of Contents

Advertisement

Thepurpose ofsafetysymbols is toattract y ourattention topossible dangers. T hesafety
symbols andthe explanations withthemdeserve yourcareful a ttention andunderstanding..
The
symbol w arnings DONOTby themselves
e liminate any danger. The instructions
and warnings
they give are no substitutes for proper accident prevention measures.
_WARNH_G:
BE SURE to read and understand all safety alert symbols such as
"DANGER",
"WARNING"
and "CAUTION"
BEFORE using this product. Failure to follow all
instructions may result in electric shock, fire andtor serious personal injury.
SYMBOL
SlIGNAIL
MEANliHG
Indicates an imminently hazardous
DANGER:
situation, which, if not avoided, will result
in death or serious injury_
Indicates a potentially hazardous
WARNIIIR@:
situation, which, if not avoided, could
result in death or serious injury.
Indicates a potentially hazardous
CAUTIIOH:
situation, which, if not avoided, may result
in minor or moderate injury,
(Without Safety Alert Symbol) Indicates
CAUTaO_:
a situation that may result in property
damage.
I
WARNtING:
To ensure safety and reliability, all repairs should be performed by a
qualified service technician
at Sears Service Center.
_t_ARIRti_IG:
The operation of any power tool can result in foreign objects
being thrown into your eyes, which can result in severe eye damage. Before
beginning power tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We recommend Wide
Vision Safety Mask for use over eyeglasses or standard safety glasses with side
shields.. Always use eye protection which is marked to comply with ANSI Z871.
$AVE THESE
JN$TR@CTII@N$
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents