Led Functions Of Charger; Charging A Hot Battery Pack; Charging A Cold Battery Pack; Defective Battery - Craftsman 320.28102 Operator's Manual

20.0-volt lithium-ion cordless 7 1/4-in circular saw with laser trac
Table of Contents

Advertisement

LED FUNCTIONS
OF CHARGER (Fig. 4)
F_g. 4
LED INDICATOR
(n)
HI/LO
TEMP.
(SEE MANUAL)
DEFECTIVE
BATTERY
BATTERY
CHARGING
BATTERY
FULL
BATTERY
RED
PACK
LED
Hot/Cold
On
battery
Defective
Flashing
Charging
Off
Fully
Off
charged
GREEN
LED
ACTIC
Charging will begin when
Off
battery returns to
32°F (0°C).t0 ,
(40°0)
Off
Battery pack ol charger is
defective
Flashing
Charges in 5! minutes
I -
Charging is complete
On
I
Maintenance
charging
I
CHARGING
A HOT BATTERY PACK
if the battery pack is above normal temperature
range, the red LED will be lit and the green LED
will be off. When the battery pack cools down to approximately
104°F (40°C), the charger will
automatically
begin charging.
CHARGING
A COLD BATTERY PACK
If the battery pack is below the normal temperature
range, the red LED will be lit and the green
LED will be off. When the battery warms to a temperature
of more than 32°F (0°C), the charger
will automatically
begin charging_
DEFECTIVE
BATTERY
If the charger detects a problem, the red LED will begin flashing and the green LED will be off.
[] If defective, remove and reinsert the battery pack in the charger,. If the LED status reads
"defective" a second time, try charging a different battery pack.
[] if a different battery pack charges normally, dispose of the defective battery pack (see
Maintenance
section).
[] If a different battery pack also indicates "defective," the charger may be defective.
BATTERY CHARGING
If the battery pack is within normal temperature
range, the green LED will begin flashing and the
red LED will be off.. The battery pack will reach a full charge in 50 minutes,, The POWER BAR
LED lights will cycle right to left during charging, This is part of the normal charging operation_
The POWER BAR LED Iights will not be displayed when the POWER BAR button is pressed while
the battery pack is on the charger.
BATTERY FULL
if the battery pack is within normal temperature
range, the green LED will be lit and the red LED
will be off The battery pack is fully charged and ready to use. The battery pack will fully charge,
but will not overcharge,
if left on the charger. The POWER BAR LED lights will not be displayed
when the POWER BAR button is pressed while the battery pack is on the charger,,
NOTE: Charger
may warm up with several continuous
charge cycles. This is part of the
I
1
normal operation of the charger. Charge in a well ventilated area.
!
18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents