Replacing The Wireless Card - Gateway NV55 Service Manual

Replacing the wireless card

52
CHAPTER 3: Replacing notebook components
Tools you need to complete this task:
Phillips #0 screwdriver
Screws removed during this task:
•
1 black M2×5 (wireless card)
To replace the wireless card:
1
Complete the steps in
2
Complete the steps in
3
Detach the bar code sticker covering the antenna cables.
4
Unplug the antenna cables. Note which color cable corresponds to each of
the connectors.
Important
The number of antenna cables varies depending on the type
of wireless card installed on the notebook. IEEE 802.11n
cards typically have three antenna cables. Other types of
wireless cards usually have only two antenna cables.
5
Move the antenna cables away from the wireless card screw.
Non-marring plastic scribe
"Preparing the notebook" on page
"Removing the bay cover" on page
47.
49.