Replacing The Speakers - Gateway NV55 Service Manual

Replacing the speakers

72
CHAPTER 3: Replacing notebook components
Tools you need to complete this task:
Phillips #0 screwdriver
Flat screwdriver
Screws removed during this task:
•
1 black M2×5 (hard drive)
•
1 black M2.5×6 (optical drive)
•
3 black M2.5×6 (keyboard cover)
•
2 black M2.5×6 (LCD panel hinges - bottom)
•
2 black M2.5×6+Nylok (LCD panel hinges - top)
•
•
3 M2.5×6 black (palm rest - top side)
•
2 chrome M2×3 (speakers)
To replace the speakers:
1
Complete the steps in
2
Remove the palm rest by performing steps
rest" procedure on
3
Turn the palm rest over so that its underside is facing up.
4
Peel off the tape covering the left speaker screw.
or Non-marring plastic scribe
10 M2.5×6 black (palm rest - base side)
"Preparing the notebook" on page
page 68.
47.
2–18 of the "Replacing the palm