Chapter 6 Maintenance And Troubleshooting; Cleaning The Camera; Storing The Camera; Troubleshooting - Epson R-D User Manual

Chapter 6
Maintenance and Troubleshooting

Cleaning the Camera

To keep your camera operating at its best, you should clean it
thoroughly several times a year. Before you perform any maintenance
on the camera, be sure to read the "Safety Instructions" on page 1. Then
follow these guidelines:
❏ Be sure to turn the camera off before cleaning.
❏ Use a clean, dry cloth to keep the camera free of dust.
❏ Do not use harsh or abrasive cleaners.
❏ If necessary, clean the battery contacts with a dry cloth.

Storing the Camera

If you are not planning to use the camera for a long period of time,
remove the battery and store it in a dry location not subject to high
temperatures. This prevents damage to the camera from battery leaks
or corrosion.
Store the camera in its case. Do not store the camera in the following
locations:
❏ Where it will be exposed to direct sunlight (for example, on a car
dashboard)
❏ Near sources of bright light or high humidity
❏ Near sources of heat or in a closed car
❏ In areas with excessive dirt or dust
❏ Where it will be exposed to strong vibrations or magnetic fields

Troubleshooting

When a problem occurs, an error message usually appears on the LCD
display. Refer to the following section to solve the problem.
Status and error messages
Error message
Cannot delete. The image is
locked.
Cannot delete. The SD card is
write-protected.
Cannot lock. The SD card is
write-protected
Cannot unlock. The SD card is
write-protected.
Maintenance and Troubleshooting
Description
Unlock the image using the lock
function in the Main menu and try
again.
Release the write-protect switch from
the locked position, and try again.
The SD card is already locked as the
write-protect switch is in the locked
position.
Release the write-protect switch from
the locked position.
6
6
6
6
6
6
6
6
6
6
46