2. Use the JOG dial to select the needle you want to adjust and press
the ENTER button.
The needles indicate the following:.
Needle
E (long needle at the top of the
gauge
R (short needle on the right-side of
the gauge)
E (short needle at the bottom of the
gauge)
A (short needle on the left-side of the
gauge)
Note:
For details, see "About the Status Gauge" on page 23.
3. Move the left or right arrow using the JOG dial and press the ENTER
button. The selected needle is moved by increments of one each
time you press the ENTER button.
4. Repeat step 3 until the needle returns to its original position.
5. Select Finish and press the ENTER button.
6. To calibrate another needle, repeat steps 2 to 5.
When you're done, select Finish and press the ENTER button.
The settings are saved, and the screen returns to the Camera
Settings menu.
Function
Number of remaining photos
Photo quality
Remaining battery power
White balance
32
Taking Pictures
2
2
2
2
2
2
2
2
2
2