Viewfinder Indicators; Internal Clock; Power Supply; Battery Charger - Epson R-D User Manual

Viewfinder indicators

Exposure meter: Displays optimal shutter speed on LED display
based on metered value. Also displays current
value through shutter speed dial (optimal shutter
speed is the flashing number on the LCD display).
Displayed shutter speed: 1/2000 to 1 sec, bulb

Internal clock

Internal clock: Records the shooting date on the photo
(YYYY/MM/DD, H/M/S)
Contains a capacitor for clock back-up
(24 hours without battery)

Power supply

Type of battery: Li-ion battery
Model: EU-85
Output voltage: 3.7 V
Capacity: 1500 mAh
51
Appendix
Battery service life: Number of shots possible
Under shooting conditions 1*: Up to about 1000
shots
Under shooting conditions 2**: Up to about 360
shots (compliant with the CIPA standard)
* Shooting conditions 1:
Shooting 6 pictures per minute at a regular
interval, then turning the camera off for one
minute before turning it on again and repeating
this procedure. Flash is off, shutter speed is set to
1/250, ISO is set to 200, image size is set to N
(JPEG; 2240 × 1488 pixels) and WB is set to Sunny.
** Shooting conditions 2:
Turning on the camera and waiting 30 seconds
before taking the first picture, then taking 9 more
pictures at 30 second intervals before turning off
the camera and removing the battery for 10
minutes, then repeating this procedure. The
flash is attached to the accessory shoe and is on
for every second shot, shutter speed is set to
1/125, ISO is set to 200, image size is set to H
(JPEG; 3008 × 2000 pixels) and WB is set to Auto.

Battery charger

Model No.: A281H
Input voltage: 100 to 240 VAC, 50/60Hz
Charging method: Constant voltage, constant current
Charging display: Charging: Red LED lit
Completed: LED unlit