Chapter 4 Using The Lcd Display; How To Use The Lcd Display; Menu Structure - Epson R-D User Manual

Chapter 4
Using the LCD Display

How to Use the LCD Display

You can use the LCD display to view photos in playback mode or make
camera settings. When using the LCD display, invert it toward you and
press the LCD button. To invert the LCD monitor, insert your finger
into the indentation at the bottom of the display and open the LCD so
that it is at right angles to the camera (1). Then rotate it 180° (2) and turn
the display 90° again (3).
Indentation
Caution:
c
❏ Do not leave the LCD display open, or try to use the camera while
it is open.
❏ Do not attempt to lift the camera by the LCD display.
DUMMY
Note:
❏ When you turn the power switch on while the LCD display is inverted
toward you, the camera enters playback mode.
❏ When you perform one of the following in playback mode, the LCD display
turns off and the camera returns to picture-taking mode.
- Press the LCD button
- Press the shutter button halfway down
- Invert the LCD display

Menu structure

In playback mode, you can use several menus to specify camera
settings. To navigate through the menus or functions, use the JOG dial
and buttons next to the LCD monitor.
LCD button: Switches from picture-taking mode to playback
mode, and vice versa.
MENU button: Displays the Main menu on the LCD display.
ENTER button: Selects settings and displays submenus.
Using the LCD Display
4
4
4
4
4
4
LCD
4
MENU
ENTER
CANCEL
4
USER
4
4
40