Getting Started - Epson R-D User Manual

X contact Used to mount an optional flash.
Lens release button Used to mount or remove lenses.
AE-lock button Locks exposure.
Photo quality/WB lever Sets photo quality or white balance.
SD card access LED Indicates the following statuses of the SD card.
On: accessing a memory card
Flashing: a memory card error has occurred
Off: not accessing a memory card
LCD button Switches between picture-taking mode and
playback mode.
MENU button Displays the Main menu on the LCD monitor
(available in playback mode).
ENTER button Defines the selected item or settings (available
in playback mode).
CANCEL button Returns to the previous menu without making
any settings (available in playback mode).
USER button Performs the function previously assigned to it.
LCD display Displays a menu screen or photos.
Shutter button Half-release: Press the shutter button halfway
down to display the optimal shutter speed (i.e.,
optimal exposure value) in the viewfinder.
Also, pressing this button halfway in playback
mode or Power Save Timer mode returns the
camera to picture-taking mode.
Full-release: Press this button fully down to take
a photo.
11

Getting Started

Status gauge Four needles display information about the
current settings (number of remaining photos,
photo quality, remaining battery power, and
white balance settings). For details, see
"About the Status Gauge" on page 23.
Accessory shoe Used to mount optional equipment such as a
flash or external viewfinder.
JOG dial Navigates through the menus or photos
displayed on the LCD monitor. For details, see
"Menu structure" on page 40.
Frame selector lever Sets a field angle for the finder.
Shutter charge lever Winds up the shutter.
Power switch Switches the power on/off.
Shutter speed /ISO Sets the shutter speed. Or pull this dial up and
speed dial rotate it to set the ISO sensitivity.
Lock-release button Unlocks the shutter speed dial.