Characters Have Jagged Or Uneven Edges; Clipped Images - Lexmark X204N - X B/W Laser User Manual

P
ACKING MATERIAL MAY BE ON THE TONER CARTRIDGE OR PHOTOCONDUCTOR KIT
1
Remove the toner cartridge and photoconductor kit.
2
Remove any remaining packing material.
3
Reinstall the toner cartridge and photoconductor kit.
T
HE TONER MAY BE LOW
When 88 Cartridge low appears, order a new toner cartridge.
If the problem continues, the printer may need to be serviced. For more information, contact Customer Support.

Characters have jagged or uneven edges

If you are using downloaded fonts, verify that the fonts are supported by the printer, the host computer, and the
software program.

Clipped images

These are possible solutions. Try one or more of the following:
C
HECK THE GUIDES
Move the width and length guides in the tray to the correct positions for the paper size loaded.
C
HECK THE PAPER SIZE SETTING
Make sure the paper size setting matches the paper loaded in the tray:
1
From the printer control panel, check the Paper Size setting from the Paper menu.
2
Before sending the job to print, specify the correct size setting:
•
For Windows users, specify the size from Print Properties.
•
For Macintosh users, specify the size from the Page Setup dialog.
Troubleshooting
151