Network Card Menu; Tcp/Ip Menu - Lexmark X204N - X B/W Laser User Manual

Network/Ports Standard Network or Network <x>
Network Reports
Menu item Description
Print Setup Page Prints a report containing information about the current network setup
Note: The Print Setup Page contains information about the network printer settings, such as the
TCP/IP address.

Network Card menu

This menu is available from the Network/Ports menu:
Network/Ports Standard Network or Network <x>
Menu item
View Card Status
Connected
Disconnected
View Card Speed
Network Address
UAA
LAA
Job Timeout
0-225 seconds
Banner Page
Off
On

TCP/IP menu

Use the following menu items to view or set the TCP/IP information.
Note: This menu is available only for network models or printers attached to print servers.
This menu is available from the Network/Ports menu:
Network/Ports Standard Network or Network <x>
Menu item
Activate
On
Off
Std Network Setup or Net <x> Setup
Std Network Setup or Net <x> Setup
Description
Lets you view the connection status of the Network Card
Lets you view the speed of a currently active network card
Lets you view the network addresses
Sets the amount of time in seconds that a network print job can take before it
is canceled
Notes:
•
90 seconds is the factory default setting.
•
A setting value of 0 disables the timeout.
•
If a value of 1–9 is selected, then the setting is saved as 10.
Allows the printer to print a banner page
Note: Off is the factory default setting.
Std Network Setup or Net <x> Setup
Description
Activates TCP/IP
Note: On is the factory default setting.
Understanding printer menus
107
Reports or
Network Card
TCP/IP