Fax Receive Settings - Lexmark X204N - X B/W Laser User Manual

Menu item
Driver to fax
Yes
No
Dial Mode
Tone
Pulse
Max Speed
2400
4800
9600
14400
33600
Background Removal
-4 to +4
Contrast
Best for content
0–5
Shadow Detail
-4 to +4
Scan edge to edge
On
Off
Sharpness
1–5

Fax Receive Settings

Menu item
Enable Fax Receive
On
Off
Rings to Answer
1–25
Auto Answer
Yes
No
Manual Answer Code
1–9
Description
Allows driver to fax jobs to be sent by the printer
Note: Yes is the factory default setting.
Specifies the dialing sound, either as a tone or a pulse
Note: Tone is the factory default setting.
Specifies the maximum speed in baud at which faxes are sent
Note: 33600 baud is the factory default setting.
Adjusts the amount of background visible on a copy
Note: 0 is the factory default setting.
Specifies the contrast of the output
Note: "Best for content" is the factory default setting.
Adjusts the amount of shadow detail visible on a copy
Note: 0 is the factory default setting.
Specifies if the original document is scanned edge-to-edge
Note: Off is the factory default setting.
Adjusts the sharpness of a fax
Note: 3 is the factory default setting.
Description
Allows fax jobs to be received by the printer
Note: On is the factory default setting.
Specifies the number of rings before answering an incoming fax job
Note: 3 is the factory default setting.
Allows the printer to answer an incoming fax job
Note: Yes is the factory default setting.
Lets you enter a code on the telephone number pad to begin receiving a fax
Notes:
•
This menu item is used when the printer shares a line with a telephone.
•
9 is the factory default setting.
Understanding printer menus
99