Customizing fax settings
Changing the fax resolution
Adjusting the resolution setting changes the quality of the fax. Settings range from Standard (fastest speed) to Super
Fine (slowest speed, highest resolution).
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
From the printer control panel, press the Fax button.
4
Enter the fax number using the keypad.
5
Press the Options button.
6
Press the arrow buttons until Resolution appears, and then press
7
Press the arrow buttons to change the resolution, and then press
8
Press
.
Making a fax lighter or darker
1
Load an original document faceup, short edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, then adjust the paper guides.
3
From the printer control panel, press the Fax button.
4
Enter the fax number using the keypad.
5
Press the Options button.
6
Press the arrow buttons until Darkness appears, and then press
7
Press the arrow buttons to make the fax lighter or darker, and then press
8
Press
.
Blocking junk faxes
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address
in the TCP/IP section.
2
Click Settings.
3
Click Fax Settings.
4
Click Analog Fax Setup.
.
.
.
Faxing
77
.