I · O Indicator Is Lit Or Flashing Orange - Epson EMP-1715/1710 User Manual

Problem Solving
i · o Indicator is lit or flashing orange
f
Status Cause
High Temp Warning
Red Orange
Replace Lamp
Orange
• If the projector is not operating properly, even though the indicators are all showing normal, refer to "When the Indicators Provide No
q
Help" ( p.45).
s
• If an indicator is displaying a status not described in the tables, contact your local dealer or the nearest address provided in the World-Wide
Warranty Terms. s
Warning
(This is not an abnormality. However, if the temperature rises too high again, projection stops automatically.)
• Check that the air filter and air exhaust vent are clear, and that the projector is not positioned against a wall.
• If the air filter is clogged, clean or replace it. s p.54,
Replace it with a new lamp. s
If you continue to use the lamp after the replacement period has passed, the possibility that the lamp may explode
increases. Replace it with a new lamp as soon as possible.
Inquiries
: Lit : Flashing
Remedy or Status
59
p.56
: Off : Varies according to the projector status
44