List of ESC/VP21 Commands
Command List
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error message
is output and a ":" is returned.
Item
Power ON/OFF
ON
OFF
Signal selection
Computer (auto)
Computer
Component video
Video
S-video
EasyMP (EMP-
1715/1705 only)
A/V Mute ON/OFF
ON
OFF
A/V Mute selection
Black
Blue
Logo
* Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
Command
PWR ON
PWR OFF
SOURCE 1F
SOURCE 11
SOURCE 14
SOURCE 41
SOURCE 42
SOURCE 50
MUTE ON
MUTE OFF
MSEL 00
MSEL 01
MSEL 02
Cable Layouts
USB connection
f
Connector shape: USB (Type B)
<At the projector>
(Type B)
* You cannot use the USB Type A port (EMP-1715/1705 only) as a USB
hub.
67
<At the computer>