Epson EMP-1715/1710 User Manual page 36

List of Functions
Sub Menu
Operation
Direct Power On: You can set whether Direct Power On is enabled (On) or disabled (Off).
When it is set to "On" and the projector power cable is connected to an electrical outlet, be aware that sudden surges of electricity when power
comes back on after a power outage may cause the projector to turn on automatically.
Sleep Mode:
• You can set whether projection stops automatically (On) or not (Off) when no operations are carried out for about 30 minutes while no image
signals are being input.
• You can set whether the power turns off automatically (On) or not (Off) after about 30 minutes when the A/V mute slide is closed.
Sleep mode is set to (Off) at the time of purchase, so do not forget to turn off the power after projecting.
High Altitude Mode: Set to "On" when using the projector above an altitude of 1500 m.
Standby Mode
You can use network monitoring and control functions while the projector is in standby mode when this is set to "Network On".
(EMP-1715/1705
You can use SNMP
only)
product.
USB Type B Set to "EasyMP" when the projector and a computer are connected by a USB cable and computer images are projected. s Wireless LAN Quick
(EMP-1715/1705 Connection Guide
only)
Link 21L
You can set whether or not to use EMP Link21L
(Select it after setting "USB Type B" to "Link 21L".)
Multi-screen You can adjust the hue and brightness of each projected image when multiple projectors are lined up and projecting. s
Screen ID: When performing "Image Correction" for "Multi-screen" by using one remote control for multiple projector's, you can define which
projector to use when individual IDs are set.
The IDs set here are only effective during "Image Correction" for "Multi-screen".
Image Correction: You can make the following adjustments.
• Adjustment Level: You can adjust from black to white in five stages called levels 1 to 5, and in each level 1to 5 you can adjust "Brightness
Correct." and "Color Correct".
• Brightness Correct.: Corrects the difference in the brightness of each product.
• Color Correct. (G/R) / Color Correct. (B/Y): You can correct the difference in the colour of each product.
Language You can set the language for message displays.
Reset
You can reset "Display
To return all menu items to their default settings, see s
*1 When "User's Logo Protect" is set to "On" in "Password Protect", settings relating to user's logo cannot be changed. You can make changes after setting "User's
Logo Protect" to "Off". s
*2 Except for "High Altitude Mode".
g
to monitor and control the status of the projector over the network, or by using the "EMP Monitor" software supplied with this
*1 *2
" and "Operation ", in the "Extended" menu to their default settings.
p.27
Function
g
utility software.
p.39
36
p.23