Problems When Projection Starts - Epson EMP-1715/1710 User Manual

Problem Solving
f Image colours are not right
Check
Do the input signal settings match the signals from the
connected device?
Is the image brightness adjusted correctly?
Are the cables connected correctly?
Is the "contrast g " setting adjusted correctly?
Is the colour adjusted correctly?
Are the colour saturation and tint adjusted correctly?
Only when projecting images from a video source
Images appear dark
f
Check
Are the image brightness and luminance adjusted correctly?
Is the "contrast g " setting adjusted correctly?
Is the lamp due for replacement?

Problems when projection starts

f
Power does not turn on
f
Check
Did you press the [Power] button?
Are the indicators switched off?
Change the following settings according to the signal for the connected equipment.
When projecting images from equipment connected to Computer (Component Video) s"Signal"-
"Computer Input" p.33
When projecting images from equipment connected to Video or S-Video s"Signal"-"Video Signal
System" p.33
Adjust the "Brightness" setting from the configuration menu. s"Image"-"Brightness"
Check that all the cables required for projection are securely connected. sQuick Start Guide
Adjust the "Contrast" setting from the configuration menu. s"Image"-"Contrast"
Adjust the "Color Adjustment" setting from the configuration menu. s"Image"-"Color Adjustment"
Adjust the "Color Saturation" and "Tint" settings from the configuration menu. s"Image"-"Color
Saturation", "Tint" p.32
Adjust the "Brightness" and "Brightness Control" settings from the configuration menu.
p.32 s"Settings"-"Brightness Control"
s"Image"-"Brightness"
Adjust the "Contrast" setting from the configuration menu.
s"Image"-"Contrast" p.32
When the lamp is nearly ready for replacement, the images become darker and the colour quality becomes
poorer. When this happens, replace the lamp with a new lamp. s
Press the [Power] button to turn the power on.
The power cable is not connected correctly or power is not being supplied normally.
Connect the projector's power cable correctly. sQuick Start Guide
Check that your electrical outlet or power source is functioning correctly.
Remedy
p.32
Remedy
p.34
p.56
Remedy
49
p.32
p.32