3Com Fast EtherLink XL PCI 10/100BASE-TX User Manual page 23

If a protocol is missing, follow these steps:
a Select the protocol and click Add.
b From the Select Network Protocol menu, select
Microsoft in the left pane. In the right pane, select the
protocol and click OK.
If a client is missing, follow these steps:
a Select the client and click Add.
b From the Select Network Client menu, select Microsoft
in the left pane, select the client in the right pane, and
click OK.
10 For NetWare only, on the Network screen, remove the
following network components, if present:
Microsoft Client for Microsoft Network NetBEUI
The network components should now include:
Client for NetWare Networks
3Com EtherLink XL Adapter
3Com dRMON SmartAgent PC software
IPX/SPX Compatible Protocol
If a protocol is missing, follow these steps:
a Select the protocol and click Add.
b From the Select Network Protocol menu, select
Microsoft in the left pane. In the right pane, select the
protocol and click OK.
If a client is missing, follow these steps:
a Select the client and click Add.
b Select Microsoft.
c Click Client for NetWare Networks and then Properties.
To select the NetWare server, follow these steps:
a Under the General tab, set your preferred server and the
first network drive and click OK.
b Set the primary network logon to Client for NetWare
Networks and click OK.
Windows 95 3-3