Installing The Network Driver - 3Com Fast EtherLink XL PCI 10/100BASE-TX User Manual

3-8 C 3: I
HAPTER

Installing the Network Driver

Follow these steps to install the network driver in a PC
running Windows NT version 3.51:
1 Install the 3C905B-TX NIC and connect it to the
network, as described in
2 Restart the PC and start Windows NT.
3 In the Control Panel, double-click Network.
4 In the Network Settings window, click Add Adapter.
5 In the Add Network Adapter window, select <Other>
Requires disk from manufacturer.
6 Click Continue.
7 Insert EtherDisk Diskette #2 in drive A and click OK.
8 In the Select OEM Option box, select
3Com EtherLink XL PCI Adapter (3C905B).
9 Click OK.
The Bus Location window appears.
10 Click OK.
Windows NT copies the files from EtherDisk Diskette #2.
If you are prompted for network information, contact your
MIS department for the requested information.
11 In the Network Settings Change window, click OK.
Windows NT completes the installation.
12 Click Restart to restart your PC.
If you have problems, see
information.
N
NSTALLING THE ETWORK
D
RIVER
Chapter 2.
Chapter 4 for troubleshooting