3Com Fast EtherLink XL PCI 10/100BASE-TX User Manual page 18

2-2 C 2: I
HAPTER
7 Insert the 3C905B-TX NIC into an empty PCI slot,
shown in
Make sure that the NIC is firmly seated in the slot.
Figure 2-1 Inserting the NIC
8 Secure the NIC with the screw you removed earlier.
If you are installing the Remote Wake-Up connector, go to
"Connecting the Remote Wake-up Cable"
the chapter before replacing the PC cover.
9 Replace the PC cover and reconnect all previously
connected cables.
10 Turn on the power to the PC.
11 Proceed to the next section,
Network."
NIC
NSTALLING THE
Figure 2-1.
Screw
3C905B-TX NIC
PCI slot
at the end of
"Connecting to the