Table of Contents
Advertisement
3. Assembly
Fitting the hand guard :
1
5
2
4. Operation
7
6
Connecting the Hedge
Trimmer :
0
9
14
Before the hand guard
fitted, the position of the hedge
trimmer has to be changed – from
the packing position A to the
working position C.
A Hold down the button
the swivel head
(see 4. Operation "Tilting the
swivel head" ).
B Hold down the button
rotate the cutting unit
3
0° position (see 4. Operation
4
"Rotating the cutting unit by 90°" ).
C Hold down the button
the swivel head
v Push the hand guard
swivel head
fittings engage.
A
A
8
1. Loop the extension cable
0
lock
2. Insert the plug of the mains cord
extension cable
3. Plug the extension cable
5
can be
1
and tilt
2
by 90°
3
and
4
to the
1
and tilt
2
to 0°.
5
onto the
2
until the snap-on
DANGER ! Risk of physical injury !
V Slide the protective cover
7
blade
.
V First insert the Hedge Trimmer plug into the
coupling of the extension cable, then plug the
9
extension cable
V Never take hold of the protective cover
connecting the hedge trimmer.
DANGER ! Risk of electric shock !
To avoid damage to the the mains cord
9
extension cable
must be inserted into the
0
cable lock
.
V Always insert the extension cable
0
cable lock
.
9 ,
insert the loop into the cable
and pull tight.
9
.
9
into a 230 V mains power supply.
A
B
C
6
over the cutter
into a mains socket.
6
8
9
into the
8
into the socket of the
when
the
Advertisement
Table of Contents
