Table of Contents
Advertisement
6. Maintenance
Cleaning the Hedge Trimmer :
7
6
7. Troubleshooting
7
6
Fault
Hedge trimmer does not start
Hedge is not cleanly cut
Telescopic tube slips despite
clamped clamping lever / s
In the event of other faults please contact GARDENA Service.
Repairs should only be carried out by GARDENA service centres or dealers
A
authorised by GARDENA.
8. Accessories
GARDENA Maintenance Oil
DANGER ! Risk of physical injury / electric shock !
V Always unplug the mains plug and slide the
A
protective cover
before carrying out maintenance work.
V Do not clean the hedge trimmer under running
water (especially high pressure).
1. Clean the hedge trimmer with a damp cloth.
2. Lubricate the trimmer blade
GARDENA spray-oil Art. 2366). Avoid contact of the oil with
plastic parts and wear gloves.
DANGER ! Electric shock !
V Always unplug the mains plug and slide the
A
protective cover
before troubleshooting.
Possible Cause
Extension cable not plugged
in or is damaged.
When rotating the cutting unit, it
was not engaged at 0° or 90°.
When tilting the swivel head, it
was not engaged between 75°
and -45°.
Blade blunt or damaged.
Nut / s loose on clamping lever / s. v Tighten nut / s on clamping
Extends the life of the blade.
6
over the cutter blade
7
with a low viscosity oil (e.g.
6
over the cutter blade
Remedy
v Plug in the extension cable
or if necessary replace it.
v When rotating the cutting
unit, engage it at 0° or 90°.
v When tilting the swivel head,
engage it between 75° and
-45°.
v Have blade replaced by
GARDENA-Service.
lever / s using a 10 mm
spanner.
Art. 2366
7
7
17
Advertisement
Table of Contents
