Advertisement
(Continued)
Item
Part number
Power supply
For head
For printer motor
For cutter motor
For logic
Dimension
Printer mechanism
W x D x H
Printer mechanism with cutter
Interface board (DCL/DSL)
Interface board (DSL00)
Interface board (DSL300)
Weight
Printer mechanism
Printer mechanism with cutter
Interface board (std)
Interface board (medium speed)
Interface board (high speed)
Life
Head
Cutter
Platen
Environmental
Operating temperature
conditions
Operating humidity
Storage temperature
Storage humidity
Detection
Head temperature
Paper out/Mark detect
Head release
Recommended
High sensitive paper
thermal
Standard paper
sensitive paper
Medium life storage paper
Long life storage paper
FTP-639MCL103/383-R
Specifications
FTP-639MCL03/05-R
24 VDC ±5%, .9A (4A) (24V, 25% printing ratio)
24 VDC ±5% A maximum
---
5 VDC ±5% 0.2A maximum
04.2 x 40.2 x 20.5mm
---
70 x 60 x 2.6mm
95 x 73.5 x .6mm
77 x 50 x 2.5mm
Approximately 25g
---
Approximately 25g
Approximately 45g
Approximately 20g
Pulse durability: 00M pulse/dot (using Fujitsu's standard driving
method)
Wear resistance: 00km (at 2.5% print ratio)
---
5,000 times (open/close)
-0ºC to +60ºC (guarantee)
20 to 85% RH (no condensation)
-40ºC to +70ºC
5 to 95% RH (no condensation)
By thermistor
By photointerruptor
By slide switch
TF50KS-E4 (Nippon paper)
TF60KS-E2 (Nippon paper), FTP-030P004 (80mm)
PD50R (Oji paper), FTP-030P070 (80mm)
TF60KS-F (Nippon paper), FTP-030P002 (80mm)
PD70R (Oji paper)
P220VBB- (Mitsubishi paper)
PD60R-N (Oji paper)
AFP-235 (Mitsubishi paper)
TP50KJ-R (Nippon paper)
HA220AA (Nippon paper)
FTP-639MCL383#0/#02-R
24 VDC ±5% A maximum
---
2.5 x 70.3 x 37.4mm
---
Approximately 350g
,000,000 cuts minimum
0ºC to +50ºC (guarantee)
-20ºC to +60ºC
3
Advertisement
