Cutting With The Carbide Circular Blade; Scraper Blade - Craftsman 320.23465 Operator's Manual

CUTTING WITH THE CARBIDE CIRCULAR BLADE (Fig. 21)
1.
2.
3.
4.
Connect the Multi-Tool to a
power source.
Draw the cutting lines on
the workpiece.
Place the carbide circular
blade against the workpiece
at a 90 ° angle.
Switch on the tool, cut out
the grout around the wall
tile, then use a hand chisel
to remove the tile.
NOTE: When separating wall
tiles, take into consideration
that the accessory tools wear
heavily when used for longer
periods of time.
SCRAPER BLADE (67652)
DESCRIPTION (Fig. 22)
Steel scraping blade
designed for paint &
varnish, bonded carpet, soft
adhesives, vinyl flooring,
wood and other floor
coverings.
• Scraper blade is also
compatible with the Fein ®
Multi-Master tool.
Fig. 21
TO INSTALL THE SCRAPER
BLADE
,_ CAUTION: Wear protective gloves.
_, CAUTION: For all work or when changing accessory tool, always wear
protective gloves. The sharp edges of the accessory tool will cause personal
injury. Accessory tool can be very hot while working.
A_, WARNING: Do not attach
the scraper blade facing Fig. 23
backwards (Fig. 13), which may
hurt the user.
23465 ManuaLRevised_10 0705 Page 21