NOTE: The ribs on the
shaft and the grooves
in the
accessory
tools permit a firm
connection
of the accessory
tools in increments
of 30 °
around the shaft (Fig. 14).
Apply the accessory
tool in the
orientation
appropriate
to the
task at hand.
CUTTING
WITH THE
CIRCULAR
SAW BLADE
(Fig. 15)
1. Connect
the Multi-Tool
to a
power source.
2.
Securely
clamp the
workpiece
if necessary.
3.
Draw the cutting
lines on
the workpiece.
4.
Apply the blade to the
workpiece.
5.
Switch
on the tool and
apply appropriate
pressure
to make the cut.
Fig. 14
r---
23465
Manual_Revised_lO-0705
Page 18