Sandpaper Kit; Mounting/Changing The Sandpaper; Description; Operation - Craftsman 320.23465 Operator's Manual

NOTE: Replacement Craftsman accessories and additional Craftsman accessories
are available at Sears and Craftsman retailers. Refer to the model numbers for
purchase.
SANDPAPER KIT (67655)
DESCRIPTION (Fig. 7)
• 24 pieces sandpaper (8 pieces
each 60, 120 and 180 grit).
• Always apply to the
compatible sanding plate
(supplied with your Multi-Tool).
• Sandpaper kit is also
compatible with the Fein ®
Multi-Master tool.
Fig. 7
Q O
0
0 O
MOUNTING/CHANGING THE SANDPAPER (Fig. 8)
_, WARNING: Check that the
sanding plate and sandpaper Fig. 8
are correctly attached. An
incorrect or insecurely fastened
application tool can come
loose during operation and
cause a hazard.
1.
2.
3.
4.
!
Follow the directions for
Attaching the Application
Tool to attach the sanding
plate to the Multi-Tool.
Align the sandpaper with
the sanding plate and use
your hand to press it firmly
onto the sanding plate.
Press the sandpaper firmly against a smooth surface for a short period, then
switch on the tool. The burr will form a non-slip bond with the outer edge of
the sandpaper felt. This will avoid premature wear.
If one point has become worn, pull off the sandpaper, turn it 120 ° and place
it on the sanding plate again.
23465 ManuaLRevised_10 0705 Page 15