User Password - Asus RAMPAGE IV GENE User Manual

User Password

If you have set a user password, you must enter the user password for accessing the system.
The User Password item on top of the screen shows the default Not Installed. After you set
a password, this item shows Installed.
To set a user password:
Select the User Password item and press <Enter>.
1.
From the Create New Password box, key in a password, then press <Enter>.
2.
3. Confirm the password when prompted.
To change a user password:
Select the User Password item and press <Enter>.
1.
From the Enter Current Password box, key in the current password, then press
2.
<Enter>.
From the Create New Password box, key in a new password, then press <Enter>.
3.
4. Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user password, but press
<Enter> when prompted to create/confirm the password. After you clear the password, the
User Password item on top of the screen shows Not Installed.
ROG RAMPAGE IV GENE
3-21