Deleting A Raid Set - Asus RAMPAGE IV GENE User Manual

Deleting a RAID set

Take caution when deleting a RAID set. You will lose all data on the hard disk drives when
you delete a RAID set.
To delete a RAID set:
From the utility main menu, select 2. Delete RAID Volume and press <Enter>. The
1.
following screen appears:
Intel(R) Rapid Storage Technology - Option ROM - v10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
Name Level Drives Capacity Status Bootable
Volume0 RAID0(Stripe) 2 298.0GB Normal Yes
[↑↓]-Select [ESC]-Previous Menu [DEL]-Delete Volume
2. Use the up/down arrow key to select the RAID set you want to delete, and then press
<Del>. The following warning message appears:
Are you sure you want to delete volume "Volume0"? (Y/N):
3. Press <Y> to delete the RAID set and return to the utility main menu, or press <N> to
return to the DELETE VOLUME menu.
Exiting the Intel
To exit the utility:
From the utility main menu, select 5. Exit, and then press <Enter>. The following
1.
warning message appears:
2. Press <Y> to exit or press <N> to return to the utility main menu.
4-34
[ DELETE VOLUME MENU ]
[ HELP ]
Deleting a volume will reset the disks to non-RAID.
WARNING: ALL DISK DATA WILL BE DELETED.
(This does not apply to Recovery volumes)
[ DELETE VOLUME VERIFICATION ]
ALL DATA IN THE VOLUME WILL BE LOST!
(This does not apply to Recovery volumes)
Rapid Storage Technology Option ROM utility
®
[ CONFIRM EXIT ]
Are you sure you want to exit? (Y/N):
Chapter 4: Software support