Table of Contents
Advertisement
3.
From the Create New Password box, key in a new password, then press
<Enter>.
4.
Confirm the password when prompted.
To clear the administrator password, follow the same steps as in changing an
administrator password, but press <Enter> when prompted to create/confirm the
password. After you clear the password, the Administrator Password item on top of
the screen shows Not Installed.
3.5.2
User Password
If you have set a user password, you must enter the user password for accessing
the system. The User Password item on top of the screen shows the default Not
Installed. After you set a password, this item shows Installed.
To set a user password:
1.
Select the User Password item and press <Enter>.
2.
From the Create New Password box, key in a password, then press <Enter>.
3.
Confirm the password when prompted.
To change a user password:
1.
Select the User Password item and press <Enter>.
2.
From the Enter Current Password box, key in the current password, then
press <Enter>.
3.
From the Create New Password box, key in a new password, then press
<Enter>.
4.
Confirm the password when prompted.
To clear the user password, follow the same steps as in changing a user assword,
but press <Enter> when prompted to create/confirm the password. After you clear
the password, the User Password item on top of the screen shows Not Installed.
3.5.3
Secure Boot
Secure Boot [Disabled]
This item allows you to configure the Windows
its keys to protect the system from unauthorized access and malwares during
POST. Configuration options: [Disabled] [Enabled]
Secure Boot Mode [Custom]
This item allows you to select the secure boot mode. Configuration options:
[Standard] [Custom]
Restore Factory Keys
This item allows you to restore factory keys. Press Yes to proceed and No to
cancel.
Chapter 3: BIOS Setup
Secure Boot settings and manage
®
3-9
Advertisement
Table of Contents
