Asus RAMPAGE IV GENE User Manual page 82

Load Loose PSC Profile
Change settings to suit Loose PSC Profile by selecting Yes.
Load Tight 4x4GB Hynix Profile
Change settings to suit Tight 4x4GB Hynix Profile by selecting Yes.
Load RAW MHZ Profile
Change settings to suit RAW MHZ Profile by selecting Yes.
Rampage Tweak [Auto]
Mode 1 can help Memory Compatibility. Mode 2 can help overclocking and
performance. Configuration options: [Auto] [Mode 1] [Mode 2]
Primary Timings
DRAM CAS# Latency [Auto]
Configuration options: [Auto] [3 DRAM Clock] – [15 DRAM Clock]
DRAM RAS# to CAS# Delay [Auto]
Configuration options: [Auto] [4 DRAM Clock] – [15 DRAM Clock]
DRAM RAS# PRE Time [Auto]
Configuration options: [Auto] [4 DRAM Clock] – [15 DRAM Clock]
DRAM RAS# ACT Time [Auto]
Configuration options: [Auto] [4 DRAM Clock] – [40 DRAM Clock]
Chapter 3: BIOS setup
3-8