Paper Feed Problems - Epson Stylus Photo RX620 Quick Manual

If you see your Stylus Photo RX620 in the Windows Control Panel, but you
can't scan, uninstall and reinstall its software. See the on-screen Reference
Guide to uninstall the software, then follow the installation instructions on
the Start Here sheet.
The Stylus Photo RX620 scanning software doesn't work properly.
Make sure your system meets the requirements listed in the on-screen
Reference Guide.
Check if your computer has enough memory for your software. If you're
running other software at the same time, the computer may not have enough
memory. Try closing any open applications, including screen savers and virus
protection programs.
If you're scanning a large photo or at a high resolution, your computer may
not have enough memory to process the image.
Make sure that
software.
Check your software installation. If necessary, uninstall your software as
described in the on-screen Reference Guide, then reinstall it as explained on the
Start Here sheet.

Paper Feed Problems

Too many copies are printing.
Make sure that the
set for multiple copies.
Paper doesn't feed correctly or jams in the Stylus Photo RX620.
If paper doesn't feed, remove it from the sheet feeder. Fan the paper, load it
against the right side, and slide the left edge guide against the paper (but not
too tightly). Do not load too many sheets of paper at a time (don't go past the
arrow mark on the left edge guide).
EPSON Stylus Photo RX620
setting in your printer software and/or program aren't
Copies
is selected in your application
Problems and Solutions
65