Inserting Your Camera's Memory Card - Epson Stylus Photo RX620 Quick Manual

Inserting Your Camera's Memory Card

1. Turn off your computer or disconnect it from the RX620; otherwise, photos
may automatically copy to your computer when you insert a card.
2. Open the memory card slot cover.
3. Make sure the memory card light (next to the card slots) is off and all the slots
are empty. Then insert your card as shown:
CompactFlash or
Microdrive (bottom)
The memory card light flashes, then turns green.
Caution:
Do not insert more than one card at a time.
Wait for the memory card light to stop flashing before removing your card or turning off
the RX620, or you may lose data on the card.
Remove any cards before connecting or disconnecting the RX620 and your computer.
24
Making Prints From Your Digital Camera
MemoryStick, SD, or
MMC (middle)
Memory
card light
Open cover
SmartMedia or xD
(top)