Scanning Film Or Slides - Epson Stylus Photo RX620 Quick Manual

4. Press the
Scan
5. Use the u and d buttons to choose
button.
OK
6. Use the u, d, l, and r buttons to select the following options:
Scan area
color, select
Document type
: select
Quality
7. Press the x
Color
folder on your memory card.
8. When scanning is finished, you see a confirmation screen. Note the name
given to your image and its location on the card.
9. Click when done, then remove the card.
OK
Caution:
Do not remove the card or turn off the Stylus Photo RX620 while the memory card light
is flashing, or you may lose data.

Scanning Film or Slides

After inserting a memory card (see page 39), you can scan film or slides to the card
and save your photos in JPEG format. Follow the steps in these sections:
"Removing the Film Holder and Document Mat" on page 42
"Placing 35-mm Slides in the Holder" on page 43
"Placing 35-mm Film Strips in the Holder" on page 44
"Scanning and Saving to Your Memory Card" on page 45
button to set the RX620 to Scan mode.
: select
Auto cropping (
Max area)
: select
Graphics
Photo
button. The photo is scanned and saved to the "epscan"
Scan to Memory Card
if the edges of the photo are light in
Scanning Film or Slides
, then press the
41