Copying A Photo - Epson Stylus Photo RX620 Quick Manual

Copying a Photo

To print long-lasting photos with a professional finish, choose an Epson paper
specially designed for printing photos. Many different sizes and paper types are
available (see the inside back cover). To print beautiful photos without white
borders around the edges, try using a borderless layout (available only when
printing on 4 × 6-inch, 5 × 7-inch, 8 × 10-inch, and letter-size Epson paper).
1. Load your paper, then place your original on the scanner glass (see page 9).
2. Press the
Copy
Confirm the
layout setting
at the top of
the screen
(see step 3
below)
3. Check the layout setting at the top of the screen and make sure it's the one you
want to use (see pages 13 and 14 for layout options). If you want to print your
photo without white borders, make sure
If necessary, press the
desired setting. Then press
4. Use the u, d, l, and r buttons to select these settings:
: Print from 1 to 99 copies.
Copies
Reduce/Enlarge
Otherwise, select
the image to fit various common paper sizes:
!
Letter
!
4 × 6
Zoom In/Out
button. You see this screen:
Copy Options
to apply the setting.
OK
: For borderless printing, select
to print your photo at its original size; or resize
Actual
4 × 6
Letter
Letter 5 × 7
: Resize the original by a specific amount (25% to 400%).
Borderless Copy
button and change
Auto Fit Page
!
5 × 7
!
Letter
Arrow
buttons
is shown.
to the
Copy Layout
.
!
4 × 6 8 × 10
!
8 × 10 5 × 7
Copying a Photo
11