Printing Your Stored Photos - Epson Stylus Photo RX620 Quick Manual

5. Press the d button to choose
6. Press again to start the backup procedure. You may have to follow
OK
additional instructions on the RX620 screen. All the photos on your card are
copied to your connected storage device. Depending on how many photos
there are, this may take several minutes.
7. When you're done copying photos, remove the card as described on page 52.
Note:
When backing up photos to a CD-R/RW, the Stylus Photo RX620 creates a folder
for each backup session. You can store multiple backup sessions on a CD-R/RW.
Caution:
Once the backup starts, do not disconnect the cable or interrupt the process, or
you may lose data. If you need to stop the backup, press the y Stop button.

Printing Your Stored Photos

Once you have copied photos to your storage drive, you can print them by
following these steps.
1. Connect your drive to the RX620 as shown on page 50.
2. When you see this screen, use the l and r buttons select which folder to
print from, then press
3. Press the
Memory Card
print from your camera's memory card. See page 23.
, then press
Backup
.
OK
button, then follow the same steps as you would to
.
OK
Copying Photos to a USB Drive
51