Identified; Confirmation; 11.4.2.1 When An L-Platform Using A Firewall Is; 11.4.3 Server Load Balancer Status - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation Manual

b.
Confirm the name of the L-Platform using the firewall by checking the items in displayed results of the rcxadm firewall show
command (L-Platform Name). Specify the firewall name confirmed in a. as the firewall name to be specified for the name
option.
5.
Confirmation procedure after this, refer to the operation after step 3 of

Identified".

See
-
For details on firewall operations (login, status confirmation, definition extraction, definition modification), refer to the manuals of
firewalls.
-
For details on the rcxadm netdevice command, refer to "3.8 rcxadm netdevice" in the "Reference Guide (Command/XML) CE".
-
For details on the rcxadm firewall command, refer to "3.4 rcxadm firewall" in the "Reference Guide (Command/XML) CE".
11.4.3 Server Load Balancer Status Confirmation
This section explains the confirmation procedure of server load balancer status.
11.4.3.1 When an L-Platform Using a Server Load Balancer is Identified
Use the following procedure to confirm the status of server load balancers.
1.
In the orchestration tree, select the network device of a server load balancer under the L-Platform.
2.
Select the [Resource Details] tab, and click the link for [Preserved resource] of [Network Device] of [Basic Information of Network
Device].
The [Resource Details] tab of the network device is displayed.
3.
Confirm the displayed detailed information.
When the target network device is in a redundant configuration, confirm both the devices are in active status and standby status.
-
When there is a link for [Launch Network Device Web UI] in [Hardware Details]
a.
Click the link and start the server load balancer management screen.
b.
Check the event log and status (interface, system condition, and operation status) from the started management window,
and check the error detected by the server load balancer.
-
When there is no link for [Launch Network Device Web UI] in [Hardware Details]
Confirm the following information displayed in the Main Panel.
Basic Information - Device Status
The status of the server load balancer is displayed.
When the status is something other than "normal", unless changed intentionally by the infrastructure administrator, it
indicates that an error might have occurred.
Port Information - Link Status
The port status of the server load balancer is displayed.
When the status is something other than "up", unless changed intentionally by the infrastructure administrator, it indicates
that a port error might have occurred.
Additionally, check the status (system condition and operation status) by logging in to the server load balancer directly, and
check the error detected by the server load balancer.
4.
Confirm the status of the server load balancer.
-
When server load balancing is not performed as expected or an event log is output
The infrastructure administrator must confirm if the following items using auto-configuration are correct.

"11.4.2.1 When an L-Platform Using a Firewall is

- 107 -