Manager; Files; Applications; Information - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation Manual

[Windows Manager]
In value , specify the number of stored generations that were saved at backup.
>Installation_folder\SVROR\Manager\bin\rcxadm imagemgr set -attr vm.snapshot.maxversion=value
<RETURN>
[Linux Manager]
# /opt/FJSVrcvmr/bin/rcxadm imagemgr set -attr vm.snapshot.maxversion=value <RETURN>
For details on the rcxadm imagemgr command, refer to "5.9 rcxadm imagemgr" in the "Reference Guide (Command/XML) CE".
10.1.4.3 Starting the Manager
Execute the command shown below to start the Manager.
For details on the command, refer to "5.19 rcxmgrctl" in the "Reference Guide (Command/XML) CE".
[Windows Manager]
>Installation_folder\SVROR\Manager\bin\rcxmgrctl start <RETURN>
[Linux Manager]
# /opt/FJSVrcvmr/bin/rcxmgrctl start <RETURN>
10.1.4.4 Updating Backup Information of Network Device Files
When backup of network device files was executed after backing up the admin server, the backup information of network device file will
be lost when the admin server is restored.
Please update backup information of the admin server by executing the following command after restoring the admin server.
For details on how to use the command, refer to "3.8 rcxadm netdevice" in the "Reference Guide (Command/XML) CE".
[Windows Manager]
>Installation_folder\SVROR\Manager\bin\rcxadm netdevice cfbackup -name name -type type <RETURN>
[Linux Manager]
# /opt/FJSVrcvmr/bin/rcxadm netdevice cfbackup -name name -type type <RETURN>
10.1.4.5 Disabling L-Platform Applications
Disable an L-Platform application for which an application process no longer exists, if online backup of the admin server has been
performed.
For details on the command, refer to "10.9 recoverAllService (Disable L-Platform Application)" in the "Reference Guide (Command/
XML) CE".
[Windows Manager]
>Installation_folder\RCXCTMG\MyPortal\bin\recoverAllService.bat <RETURN>
[Linux Manager]
# /opt/FJSVctmyp/bin/recoverAllService.sh <RETURN>
10.1.4.6 Updating the Configuration Information in the Operational Status Information
Execute the following command to update the configuration for the operational status information:
For details on the command, refer to "13.1 cmdbrefresh (Refresh Configuration Information of System Condition)" in the "Reference
Guide (Command/XML) CE".
- 90 -