Devices; Restoration - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation Manual

Starting the Manager
Start the manager.
For details on how to start the manager, refer to
10.2 Backup and Restoration of Network Devices
This section describes how to perform the backup and restoration of network devices.
10.2.1 Mechanism of Backup and Restoration
By backing up network device configuration files, restoration of network device configurations can be done quickly when network devices
are replaced due to failures.
Up to 5 generations of network device configuration files can be backed up and saved If the number of saved generations exceeds 5
generations, older generations will be deleted, starting with the oldest generation.
Only 1 generation of network device environment files can be backed up and saved. If backup is performed, the saved network device
environment file will be deleted automatically.
This product supports the backup and restoration of network device configuration files for the following network devices.
Table 10.9 Network Devices that are Supported by Device Configuration File Management
Hardware
SR-X series
IPCOM EX series
Fujitsu
(*)
NS Appliance
Catalyst series (*)
Cisco ASA5500 series (*)
Nexus 5000 series
BIG-IP Local Traffic
F5 Networks
Manager series
*: For details on the target network devices, refer to "Table 2.73 Supported Network Devices" in the "Design Guide CE".
10.2.2 Backup of Network Devices
Whether to back up the network device file is decided based on the "CONFIG_BACKUP" parameter in unm_mon.rcxprop file.
Backup is performed in the following cases.
"2.1 Starting and Stopping the
Network Device
Configuration File
config1
config2
running-config.cli
startup-config.cli
running-config.cli
startup-config.cli
running-config
startup-config
running-config
startup-config
running-config
startup-config
config.scf
- 94 -
Manager".
Environment File
None
host_name - firmware_version_number - time .tgz
ipcomenv-
host_name: Target IPCOM EX series host name
firmware_version_number: current firmware version
number
time: The time when backup was performed
Example:
ipcomenv-ipcom-
E20L10NF0001B01-20120802-103845.tgz
IP_address .tgz
nsappliance-
Example: nsappliance-192.168.1.1.tgz
None
None
None
environment.ucs