Audit Logs Of Output By The Tenant Management, Accounting, Access Control And System Condition - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation Manual

Log name
2.
Restart the manager.
Refer to "2.1 Starting and Stopping the
Procedure for changing the number of generations to be saved
Use the following procedure to change the number of audit log generations to be saved.
1.
Rewrite the settings file.
The location to change is shown below:
[Windows Manager]
Log name
vsys_audit_log
[Linux Manager]
Log name
vsys_audit_log
2.
Restart the manager.
Refer to "2.1 Starting and Stopping the
16.2.2 Audit Logs of Output by the Tenant Management, Accounting, Access
Control and System Condition
This section explains audit logs of output by the tenant management, accounting, access control and system condition functions.
Point
-
If L-Platform Management is operated, audit logs will be output to Configuration Manager. Refer to
Management Audit Log" for details.
-
Audit logs relating to the registration, modification or deletion of infrastructure administrators, infrastructure operators, infrastructure
monitors, administrators, operators and/or monitors can be checked in the OpenDS access log.
The storage locations and file names of OpenDS access logs are as follows.
[Windows Manager]
OpenDS_Installation_folder \opends\logs\access
Settings file
Manager" for information on how to Restart the manager.
Settings file
Installation_folder \RCXCFMG\config
\vsys_log4j.xml
Settings file
/etc/opt/FJSVcfmg/config/vsys_log4j.xml
Manager" for information on how to Restart the manager.
Location to change (one location)
Example: value="100MB" (to change the size of the
audit log file to 100 MB)
Location to change (one location)
Change the underlined part of the <param
name="MaxBackupIndex" value="9" / /> element
under the <appender name="auditfileout"
class="org.apache.log4j.RollingFileAppender">
element to the desired value.
Example: value="100" (to change the number of audit
log generations to 100)
Location to change (one location)
Change the underlined part of the <param
name="MaxBackupIndex" value="9" / /> element
under the <appender name="auditfileout"
class="org.apache.log4j.RollingFileAppender">
element to the desired value.
Example: value="100" (to change the number of
audit log generations to 100)
- 150 -
"16.2.1 Configuration