Application Process Audit Log - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.1 Operation Manual

Function Operation type
registerUsagePoi
nt
getDailyCharge
registerDailyCha
rge
getMonthlyChar
ge
registerMonthly
Charge
getTenants
Access updateAuthority
Control
System dispUsageStatus
condition
(*4)
*1: If a value is not set for an item, """" is output.
An example is shown below.
... &globalpool=""""...
*2: If multiple global pools have been set, the global pools are output separated by commas.
An example is shown below.
...&globalpool=""/AddressPool,/ImagePool""...
*3: For the operation result of createOrg, deleteOrg, or updateOrg, the processing result will be output. Use the operation log (resource
operation) to check the actual processing result. Refer to
operation).
*4: Multiple lines may be output each time there is a registration operation.
*5: Format is "yyyy-MM-dd".
*6: Format is "yyyy-MM-ddTHH:mm:ss.SSSZ".
*7: Audit logs for usage condition are output only when operations are performed from the ROR Console.

16.2.3 Application Process Audit Log

This section explains the application process audit log.
Usage
To obtain the process instance audit log for the application process, execute the get process instance audit information command.
Content
Register usage "date=""<
ID >""&name=""< L-Platform name >""&tenantname=""< tenant
frequency (*4)
name of managed tenant >""&tenantdeletedate=""< date when
managed tenant was deleted >(*6)"""
Get daily usage None.
charges
Register daily usage "date=""<
charges (*4) ID""&name=""<
name of managed tenant >""&tenantdeletedate=""< date when
managed tenant was deleted >"""
Get usage charges None.
Register monthly "date=""<
usage charges (*4) ID""&name=""<
name of managed tenant >""&tenantdeletedate=""< date when
managed tenant was deleted >"""
Get tenant None.
information
Access authority "roleid=""<
modifications &actionid=""<
&permission=""<
(The above information will be output as follows: one information
item when a role name is specified, or if a file is specified, the
number of information items will match the number of action IDs.)
Display usage None.
condition
"16.1 Operation
- 156 -
Operation information (*1)
date of data registered >(*5)""&id=""< L-Platform
date of data registered >""&id=""L-Platform
L-Platform name >""&tenantname=""< tenant
date of data registered >""&id=""L-Platform
L-Platform name >""&tenantname=""< tenant
role name of modification target >""
action ID of modification target >""
allow/deny status of specified action >"""
Logs" for information on how to check the operation log (resource