Transporting The Epson 1000 Ics - Epson 1000 ICS Basics Manual

Transporting the EPSON 1000 ICS

If you move your EPSON 1000 ICS some distance, you need to prepare it for
transportation in its original box or one of a similar size.
To avoid damage, always leave the ink cartridges installed when
transporting the EPSON 1000 ICS.
1. Press the P
Operate
scanner carriage moves to the home position (toward the left side) and the print
head locks in the far right position, then turn it back off.
2. Unplug the power cord from the electrical outlet. Then disconnect the USB cable.
3. Remove any paper from the EPSON 1000 ICS and remove the paper support.
4. Press the release button and lift up the scanner.
5. If you still have the packing insert, slide it down into the area beside the ink
cartridge holder and tape it to the EPSON 1000 ICS case. If you don't have the
insert, just tape the cartridge holder to the EPSON 1000 ICS case.
move the transportation lock
to the locked position (right)
button to turn on the EPSON 1000 ICS and wait until the
tape the ink cartridge holder to
the EPSON 1000 ICS case
Maintenance
release
button
33