Epson 1000 ICS Basics Manual page 35

4. Pull up the ink cartridge clamp. (The color cartridge is on the right and the black
is on the left.) The cartridge rises up from its holder.
5. Lift the cartridge out of the EPSON 1000 ICS and dispose of it carefully.
6. Unwrap the new ink cartridge. Then
remove only the yellow tape seal on top.
You must remove the yellow tape
from the top of the cartridge or you
will permanently damage it.
Don't touch the green circuit board
on the back of the cartridge; you
may inhibit normal operation and
printing.
7. Tilt the new cartridge toward you slightly as you insert it. Lower the cartridge so
that the tabs rest on the hooks.
Don't place the cartridge under the hooks; you may damage the clamp
when you close it.
30
Replacing an Ink Cartridge
hooks
black cartridge color cartridge