Fcc Compliance Statement - Epson 1000 ICS Basics Manual

In this ink cartridge, the IC chip retains a variety of cartridge-related information, such as the
amount of ink remaining, so that a cartridge may be removed and reinserted freely. However, each
time a cartridge is inserted, some ink is consumed because the EPSON 1000 ICS automatically
performs a reliability check.
If you remove an ink cartridge for later use, protect the ink supply area from dirt and dust and
store it in the same environment as the EPSON 1000 ICS. Note that there is a valve in the ink
supply port, making covers or plugs unnecessary, but care is needed to prevent the ink from
staining items that the cartridge touches. Do not touch the ink cartridge ink supply port or
surrounding area.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio or television reception. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause interference to radio
and television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC
Certification of this device and may cause interference levels which exceed the limits established by the
FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment
interface cable with this device. If this equipment has more than one interface connector, do not leave
cables connected to unused interfaces. Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
This Class B apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
54
FCC Compliance Statement
For United States Users
WARNING
For Canadian Users